How to Set Up the CISON LS-52 Smart MCU Bluetooth Controller | Stirlingkit

Set up the Smart MCU Bluetooth Controller for your CISON LS-52 V8. This guide covers installing the Android app, connecting to CISON ENGINE, and finding the dashboard and ignition settings shown in the demo.

CISON MCU App v8.49 · Android only

Download the RAR archive and extract to install the app.

Download the Android App (.RAR)

Watch the setup demo

Watch on YouTube

1. Install the CISON MCU app

  1. Download and extract the RAR archive. If your phone cannot open RAR files, extract the archive on a computer and transfer the APK to your Android phone.
  2. Open Cison_MCU_v8.49.apk on your phone and follow the installation prompts.
  3. Turn on Bluetooth and open the CISON MCU app. Allow Nearby devices access if prompted.

2. Connect to the LS-52 MCU over Bluetooth

Watch 0:41–0:51 on YouTube ↗

  1. Power the compatible Smart MCU and keep your phone nearby.
  2. In the app, open Bluetooth Devices.
  3. Find CISON ENGINE and tap Tap to Connect. Wait for Connected! and the dashboard to appear.

Can’t find CISON ENGINE? Check that the MCU has power, your phone’s Bluetooth is on, and the app has permission to find nearby devices. Search again from inside the app.

3. Read the dashboard

Watch 0:51–0:57 on YouTube ↗

The dashboard displays engine RPM, voltage, temperature, and status. With the engine stopped, the tachometer should read 0 RPM. Use Dashboard Layout to customize the display.

4. Find the ignition settings

Watch 0:57–1:29 on YouTube ↗

Stop the engine before changing ignition settings. For your first connection, review the existing values and keep them as set unless you have tuning instructions for your setup.

Open Custom Curve from the app menu to find the ignition and discharge time curves.

Custom Curve
  • Ignition Angle shows the ignition curve across the RPM range.
  • Discharge Time shows the discharge curve. The app warns that changing it can affect engine stability.
  • Multi-Ignition shows Ignition Count, Capacitor ms, and Max RPM. After an intended change, tap Submit and wait for the app to confirm it was saved.
Switch Now

When do I need the blue firmware tool?

Watch 0:00–0:41 on YouTube ↗

The opening section shows the blue firmware tool and its four-wire connection to the silver MCU. The Android app installs on your phone, and firmware updates apply to the MCU module. If the app already connects to CISON ENGINE, you can use the dashboard right away. For a firmware update, confirm compatibility with your MCU version and follow the LS-52 MCU Firmware Update Guide.

More CISON LS-52 resources

Related articles

Go to full site