FLISHRC FL500 UH-60 Mode 2 Transmitter Setup: Original Configuration and Troubleshooting Guide

The FLISHRC FL500 UH-60 Black Hawk is a 500-class scale RC helicopter equipped with the L7 flight controller. If you have accidentally changed your transmitter settings or reset the transmitter to factory defaults, you may find that the original configuration is no longer correct or that the display shows "FLY MODE: OFF."

This guide is designed to help FLISHRC FL500 UH-60 owners using a Mode 2 transmitter review the transmitter setup, restore the correct configuration, and troubleshoot the flight-mode display by following the video tutorials below.

1. L7 Flight Controller Transmitter Setup

Use the following video as your primary reference for the L7 flight controller setup. Follow the instructions shown in the video to review the transmitter configuration and restore the appropriate settings for your FLISHRC FL500 UH-60.

2. FlySky i6S Transmitter Binding Tutorial

If your transmitter and receiver are no longer connected, refer to the following video for the FlySky i6S binding procedure. Make sure your transmitter and receiver are compatible before following the instructions.

3. Need Further Assistance?

If you have followed the video tutorials but still see "FLY MODE: OFF" or cannot restore the original transmitter configuration, please contact Stirlingkit or FLISHRC technical support.

When requesting assistance, provide your helicopter model, transmitter mode, transmitter identification number, and flight-controller version. Photos of the current transmitter display can also help the support team identify the issue.

For product information, visit the official product page below.

Explore the FLISHRC FL500 UH-60