Set up the Smart MCU Bluetooth Controller for your CISON LS-52 V8. This guide covers installing the Android app, connecting to CISON ENGINE, and finding the dashboard and ignition settings shown in the demo.
Download the RAR archive and extract Cison_MCU_v8.49.apk to install the app.
Watch the setup demo
English subtitles · 1 min 29 sec
1. Install the CISON MCU app
- Download and extract the RAR archive. If your phone cannot open RAR files, extract the archive on a computer and transfer the APK to your Android phone.
- Open Cison_MCU_v8.49.apk on your phone and follow the installation prompts.
- Turn on Bluetooth and open the CISON MCU app. Allow Nearby devices access if prompted.
2. Connect to the LS-52 MCU over Bluetooth
- Power the compatible Smart MCU and keep your phone nearby.
- In the app, open Bluetooth Devices.
- Find CISON ENGINE and tap Tap to Connect. Wait for Connected! and the dashboard to appear.
Can’t find CISON ENGINE? Check that the MCU has power, your phone’s Bluetooth is on, and the app has permission to find nearby devices. Search again from inside the app.
3. Read the dashboard
The dashboard displays engine RPM, voltage, temperature, and status. With the engine stopped, the tachometer should read 0 RPM. Use Dashboard Layout to customize the display.
4. Find the ignition settings
Stop the engine before changing ignition settings. For your first connection, review the existing values and keep them as set unless you have tuning instructions for your setup.
Open Custom Curve from the app menu to find the ignition and discharge time curves.
- Ignition Angle shows the ignition curve across the RPM range.
- Discharge Time shows the discharge curve. The app warns that changing it can affect engine stability.
- Multi-Ignition shows Ignition Count, Capacitor ms, and Max RPM. After an intended change, tap Submit and wait for the app to confirm it was saved.
When do I need the blue firmware tool?
The opening section shows the blue firmware tool and its four-wire connection to the silver MCU. The Android app installs on your phone, and firmware updates apply to the MCU module. If the app already connects to CISON ENGINE, you can use the dashboard right away. For a firmware update, confirm compatibility with your MCU version and follow the LS-52 MCU Firmware Update Guide.
More CISON LS-52 resources
- Smart MCU Bluetooth Controller — compatibility and package contents.
- CISON LS-52 V8 FAQ — engine setup, MCU connections, and troubleshooting.
- Stirlingkit Download Center — find the LS-52 engine manual and other tutorials.
- CISON LS-52 Engine & Parts — compatible parts and accessories.
0 commenti