JCZK 300C PRO RC Helicopter: Complete Setup and First Flight Tutorial | Stirlingkit

If you just got your JCZK 300C PRO RC Helicopter and feel overwhelmed by the setup process, you’re not alone. Many beginners encounter difficulties with calibration, remote controller settings, and takeoff.
👉 In this guide, we’ve prepared step-by-step tutorials with videos to help you set up, calibrate, and fly your helicopter safely.

1. H1 Flight Control – AT9S Remote Controller Setup

If you're an early adopter using the H1 flight control system with the AT9S remote controller, you'll need to complete binding and basic setup before your first flight. This video will guide you through each step to ensure a stable signal and smooth operation.

2.H2 Flight Control – T12D Remote Controller Mode Switch

Every pilot has a different preference – some fly with the throttle on the left hand, while others prefer it on the right. This tutorial shows you how to quickly switch between Mode 1 and Mode 2 on the T12D remote controller, so you can fly the way that feels most natural to you.

3.H2 Flight Control-T12D Remote Controller Setup

Correct transmitter setup is essential for safe and stable flight. In this video, you’ll learn how to configure the T12D remote controller step by step, including channel setup and signal checks, to make sure your helicopter responds reliably.

4.Low Battery Return-to-Home (RTH) Guide

Low battery is one of the most common reasons for crashes and lost aircraft. This tutorial explains how to activate and use the Return-to-Home (RTH) function, so your helicopter will automatically return when the battery is running low.

5.300C RC Helicopter Takeoff Operation Tutorial

Takeoff is the stage where beginners make the most mistakes. If done incorrectly, the helicopter can easily tip over or lose balance. In this video, you’ll learn the proper arming and throttle control techniques to achieve a safe and steady lift-off.

6.300C Helicopter Compass Calibration Guide

For GPS and return-to-home features to work correctly, you’ll need to perform compass calibration. This video shows the full calibration process and gives you tips to prevent drifting or unstable flight.

By following these setup and calibration tutorials, you can enjoy a smoother and safer flying experience with your JCZK 300C PRO RC Helicopter.

This guide is continuously being updated, so feel free to check back for new tutorials and tips.
💡 If you encounter any issues or have further questions, please don’t hesitate to contact our customer support team – we’re here to help!