Stirlingkit
RETROL VE-01 vs. VE-02:
Which Flame Licker Engine Should You Buy?
What would you rather watch on your workbench? A beam rocking back and forth as the flywheel turns, or a tiny engine making its own electricity? That’s the choice between RETROL’s two ready-to-run flame licker engines.
Compare the two engines ↓Pick the VE-01 if you want a classic rocking beam, a position scale for recording your burner settings, and simple air cooling for occasional runs. Pick the VE-02 if you want the flywheel to drive a generator and light a miniature street lamp, or if you want water cooling and plan to log RPM across repeated runs.
VE-01 Beam Engine
Watch the exposed beam and linkage.
Shop VE-01
VE-02 Generator Model
Watch the engine power its own lamp.
Shop VE-02How does a flame licker vacuum engine work?
When you watch a flame licker run, it’s easy to focus on the flame. Look at the piston instead. The trick is what happens after the valve closes.
- First, the piston draws in hot gas. As the piston moves outward, the open valve lets gases from the burner into the cylinder.
- Then the pressure drops. The valve closes, trapping the gas. As the gas cools, its pressure drops below the pressure of the air around the engine.
- Now the surrounding air does the pushing. The pressure difference pushes the piston back on its power stroke. The flywheel keeps turning and carries the engine into its next cycle.
Once you know where to look, try following that motion all the way to the rocking beam on the VE-01 or the generator on the VE-02.
How the Timing Angle Reference Scale Works
Look beside the burner on the RETROL VE-01 or VE-02 and you’ll see an engraved timing angle scale. When the valve opens during the piston cycle, hot gases can enter the cylinder. The burner’s position affects how the flame meets that opening, which can make a difference to starting and steady running.
Once you find a setting that runs well, write down the scale reading. After cleaning, reassembly, or an accidental shift, you can use that reading to return to your previous burner position. Pair it with a tachometer if you’d like to compare RPM across different settings.
The scale is a fixed reference. Reposition the burner to change how the flame meets the cylinder opening. The crank mechanism controls when the valve opens and closes.
What’s the Difference between VE-01 and VE-02 Flame Eater?
If you’re deciding what will fit on your bench or how much setup you want before a run, start here.
| Feature |
VE-01
Shop VE-01
|
VE-02
Shop VE-02
|
|---|---|---|
| Main attraction | Exposed rocking beam and linkage | Crank-and-connecting-rod mechanism with rotating flywheels |
| Burner position scale | Fixed reference scale | Fixed reference scale |
| Generator and LED street lamp | Mechanical motion display | Built-in generator powers the included LED street lamp |
| Best for | Classic beam motion, occasional runs, and burner-setting experiments | Energy conversion demos, repeated runs, and RPM testing with a separate tachometer |
| Adjustable speed | 100–1,000 RPM | 200–1,000 RPM |
| Cooling | Air cooling | Integrated evaporative water cooling |
| Listed run time | Approx. 20 min per session | Up to 20 min per fill |
| Assembly and start | Pre-assembled, manual start | Pre-assembled, manual start |
| Bore × stroke | 20 × 24 mm | 21 × 24 mm |
| Lubrication | Dry graphite | Dry graphite or wet lubrication |
| Base | Acrylic | Solid wood |
| Size and weight | 20 × 9 × 14 cm · 1.1 kg | 25 × 10 × 15 cm · 1.3 kg |
Choose the VE-01 if you love the classic beam.
- You want to watch the beam rock and the exposed linkage move at low speed.
- You want to record and revisit burner settings, and the mechanical motion is the show you came for.
- You’re planning occasional runs and prefer a compact, air-cooled setup with an acrylic base.
- You’re looking for the simpler option and want to keep your budget in check.
Choose the VE-02 if you want to see the whole energy chain.
- You want to watch the flame set the engine in motion, the flywheels drive the generator, and the LED street lamp light up.
- You run demos regularly and want integrated evaporative water cooling to help manage cylinder heat.
- You’d like to log burner settings and compare RPM with a separate tachometer.
- You like the solid wood base and the look of the flywheels in motion.
Teaching a STEM class? Start with what you want students to notice.

If you’re teaching energy transfers, I’d bring out the VE-02. Before you run it, ask, “Where do you think the lamp gets its electricity?” After the demonstration, have students trace the path from the fuel to heating, motion, electricity, and light. Then ask them where else energy goes as the engine runs.
If you’re teaching motion or air pressure, I’d choose the VE-01. Try asking, “Can you find one part that moves back and forth and another that turns all the way around?” Once students can trace the motion from the piston through the linkage, ask what pushes the piston on its power stroke.
If you teach U.S. high school physics or engineering, you can use the VE-02 to open an NGSS HS-PS3-3 lesson before students design, build, and refine their own energy conversion device. In England, the same demo can get a Key Stage 3 science class talking about energy transfers through burning fuel, changes in motion, and an electrical circuit.
Both engines use an open flame, so check your school’s rules for a teacher-led demo and follow the product instructions. The listed ages are 14+ for the VE-01 and 16+ for the VE-02. If your classroom restricts open flames, you can show a recorded run and ask students the same questions.
FAQ
What fuel do I need, and where can I buy it locally?
Buy your fuel separately before your first run. Stirlingkit does not sell fuel, and neither engine comes with it.
What to look for on the label. For the VE-02, get 95% ethanol (ethyl alcohol). The VE-01 specifications list 95% alcohol or anhydrous ethanol. A bottle marked “95%” can still be the wrong type of alcohol, so check that it says ethanol or ethyl alcohol. The VE-02 manual specifically rules out isopropyl alcohol, also sold as rubbing alcohol. Read the VE-02 manual
- In the U.S. Ask a local liquor store for 190-proof grain alcohol (95% ABV). Everclear 190 is one example. Check local stock and make sure the bottle says 190 proof, since the same brand sells lower-proof versions. See a U.S. retailer example
- In the UK. Try a specialist spirits retailer and ask for 95% ABV rectified spirit. Spirytus Rektyfikowany 95% is one example. See a UK retailer example
- Elsewhere in Europe. Ask a local spirits retailer for 95% ABV rectified spirit and check the label for the exact strength. Availability and purchase rules vary by location.
Do I need to assemble it or plug it in?
Both models come assembled and start by hand. You’ll still need to follow the first-run setup for your model. The VE-02 needs cooling water, and its generator supplies the electricity for the included lamp.
Why won’t my flame licker start, or why does it stop after a few seconds?
Start with your model’s setup guide. Check the specified fuel, wick and flame position, and any preheating instructions before changing the timing or taking anything apart. The VE-02 manual has a troubleshooting section for when the engine won’t start or won’t keep running.
Do I need graphite or oil?
It depends on which model you buy. The VE-01 lists dry graphite lubrication. The VE-02 manual gives you a dry graphite option and a wet lubrication option. Follow the instructions for your model before applying anything to the cylinder.
How long will it run on one fill?
For a workbench demo, plan around the listed run time of about 20 minutes per session for the VE-01 and up to 20 minutes per fill for the VE-02.
Can the VE-02 generator power something besides the included lamp?
The manual lists a generator voltage of 5–24 V and shows how the engine powers the included LED lamp. If you’re buying it to run a different device, check that device’s voltage and current requirements with us first. The voltage range alone doesn’t tell you what load the generator can support.
You May Also Want to Know
Getting ready for your first VE-02 run? Find out what fuel to buy, how to use the timing reference scale, and what to check if it stalls. Read the complete RETROL VE-02 guide.
- Setting up your VE-02? Get the official manual for fuel, lubrication, first-run setup, and troubleshooting.
- Curious what other flame lickers look like? Explore other vacuum engine models and see how their layouts differ.
- Looking after another model engine? Browse Stirlingkit’s setup, maintenance, and troubleshooting guides.
Fun Facts About Flame Licker Engines
- Flame licker, flame eater, or gulper? Watch the flame flicker toward the cylinder opening each time the valve opens. That little gulp is how the engine got its nicknames.
- Air does the pushing. The flame supplies heat. As the trapped gas cools, its pressure drops, and the higher air pressure outside pushes the piston back.
- The flywheel keeps it going. Think of it as momentum saved for the next stroke. Or, in workbench terms, “A flame licker without a flywheel is just a pretty candle.”
- A small shift at the burner can change the run. On either the VE-01 or the VE-02, you can jot down the scale reading when you find a burner position that starts well and runs steadily. That gives you a reference after cleaning or moving the burner.
- It’s here to put on a show. On the VE-02, the engine drives a generator that lights a miniature street lamp. You can follow the energy from flame to motion to electricity in one run.
0 Kommentare