Now on Pre-Order: SEMTO ST-FL2 8.6cc Water-Cooled Inline-Twin Engine Kit
If you remember the NR200, you'll recognize the new SEMTO ST-FL2 straight away. It's the NR200's successor: the same 8.6cc water-cooled 2-cylinder layout, rebuilt by SEMTO with more power, better-lubricated connecting rods and a built-in belt tensioner.
And like the SEMTO ST-NF2, it comes as a kit you build yourself, so you get to know every part of your engine before the first start.
The SEMTO ST-FL2 is now available to pre-order, with shipping expected from mid-November 2026.
A Real Running Engine You Build Yourself
The SEMTO ST-FL2 is for hobbyists who want more than a static model: a real 4-stroke nitro engine that you assemble, start and tune yourself. One carburetor, push-button electric start and a full assembly video keep the build approachable.
With 1.2 PS from 8.6cc, water cooling for steady temperatures on longer runs and a layout developed with 1/8-scale RC cars in mind, it also has the power to grow with you into RC and custom projects.
What Is the SEMTO ST-FL2?
The SEMTO ST-FL2 is an 8.6cc water-cooled inline-twin 4-stroke nitro engine kit. It is the upgraded successor to the NR200, with an SOHC valvetrain, a built-in centrifugal water pump and electric start. It is supplied as a DIY kit for engine building, mechanical learning and custom RC projects.
Build a Fully Functional 4-Stroke Engine Yourself
The SEMTO ST-FL2 is a real internal combustion engine, not an electrically driven display model. Its 8.6cc inline-twin layout uses two cylinders, a 4-stroke combustion cycle and a single overhead camshaft (SOHC).
Building it yourself shows you exactly how the pistons, crankshaft, camshaft and valves work together. And once you've built it, you know how it comes apart, which makes maintenance much less daunting later.

From Parts to a Running Engine
This exploded view shows the overall construction of the SEMTO ST-FL2. A printed manual and a full assembly video walk you through every step.
How the SEMTO ST-FL2 4-Stroke Engine Works
Like a full-size car engine, the SEMTO ST-FL2 works in four stages: intake, compression, power and exhaust. A timing belt drives the overhead camshaft, which opens each valve at the right moment, while combustion pushes the pistons and turns the crankshaft.
Intake
The intake valve opens as the piston moves down, drawing the fuel-air mixture into the cylinder.
Compression
Both valves close and the piston moves up, compressing the mixture.
Power
The glow plug ignites the mixture, and combustion drives the piston down, turning the crankshaft.
Exhaust
The exhaust valve opens and the piston pushes the burned gases out of the cylinder.
The NR200 Layout, Upgraded Where It Counts
About 30% More Power
Higher compression gives the SEMTO ST-FL2 about 30% more power than the NR200 from the same 8.6cc.
Better-Lubricated Rods
Each connecting rod has a lubrication hook and two oil holes, and is easy to remove for inspection.
Lighter Belt, Built-In Tensioner
A smaller MXL belt takes less power to turn, and the tensioner lets you keep it at the right tension yourself.
Made for RC Builds
Sized for 1/8-scale RC cars, with a starter motor you can mount on the left or right.
Build → Start → Tune → Explore
Building the engine is only the beginning.
From Engine Kit to Custom RC Project
The engine body measures approximately 104 × 98.2 × 96.8 mm and weighs around 700 g, about 100 g lighter than the NR200. Allow about 143 mm across the front for the exhaust pipes and starter motor.
For cooling, plan space for an 80 mm radiator and fan. Actual installation depends on your chassis, drivetrain, mounting and cooling setup, which leaves plenty of room for builders who enjoy designing their own RC projects. A dedicated SEMTO ST-FL2 clutch is in development.
Possible Uses
- 1/8-scale RC cars
- RC boats
- Engine test benches
- Custom drivetrain projects
- Desktop engine displays
A Fresh Look for SEMTO
The SEMTO ST-FL2 combines CNC-machined metal parts with sandblasted surfaces and anodized finishes. A finned green valve cover with the SEMTO ENGINE logo and two separate straight exhaust pipes give it a look closer to a real car engine.
How the SEMTO ST-FL2 Compares
Coming from an NR200? The SEMTO ST-FL2 keeps the 8.6cc water-cooled layout you know and adds more power, better-lubricated connecting rods, a lighter belt with a tensioner and a starter motor on either side. NR200 parts and starter kits do not fit it.
Read: The NR200 Is Back as the SEMTO ST-FL2 →Choosing between the ST-NF2 and ST-FL2? The air-cooled 7cc SEMTO ST-NF2 is the simplest and most affordable way into a running 2-cylinder engine, in nitro or gasoline. The water-cooled 8.6cc SEMTO ST-FL2 gives you about twice the power for heavier RC builds.
Read: SEMTO ST-FL2 vs ST-NF2 →Starter Kit and Running Accessories
The SEMTO ST-FL2 engine kit includes the engine parts, assembly tools and a printed manual. To run it, you will also need:
Pre-Order the SEMTO ST-FL2
Expected to ship mid-November 2026. Use code E50 for $50 off the engine ($399.99 → $349.99) and code M2026 for 10% off the Starter Kit ($109.99 → $98.99). Limited-time offer; please check the product page for current details.
Pre-Order the SEMTO ST-FL2 →SEMTO ST-FL2: Quick Answers
When will the SEMTO ST-FL2 ship?
The SEMTO ST-FL2 is on pre-order now, with shipping expected from mid-November 2026.
Is the SEMTO ST-FL2 the same as the NR200?
It is the NR200's upgraded successor. It keeps the same 8.6cc water-cooled inline-twin layout, bore and stroke, and adds higher compression, about 30% more power, redesigned connecting rods, a lighter belt with a built-in tensioner and a starter motor that mounts on either side. It is supplied as a kit rather than fully assembled.
Is the SEMTO ST-FL2 good for beginners?
Yes. It has one carburetor to tune, push-button electric start and a full assembly video to follow. It is still a real fuel-powered engine, so take your time with the manual during assembly and the first runs.
Can the SEMTO ST-FL2 be installed in an RC car?
Yes. It was developed with 1/8-scale RC cars in mind. Fitment depends on your chassis, drivetrain, mounting, clutch and cooling setup.
What fuel does the SEMTO ST-FL2 use?
20–25% nitro fuel. The SEMTO ST-FL2 is a nitro engine and does not run on gasoline.
Have more questions about setup, carburetor tuning or belt tension? See the full SEMTO ST-FL2 FAQ.
Engine, Starter Kit and Spare Parts in One Place
Find the SEMTO ST-FL2 engine kit, the matching Starter Kit and spare F-type glow plugs in our SEMTO ST-FL2 Engine & Parts collection.
Shop SEMTO ST-FL2 Engine & Parts →
I have been looking for a water cooled version of this engine. I would love to put this in the 1/8 scale Koenigsegg Agera that I am currently designing and building.
I’m interested in winning this engine so I can put it in one of my projects is this the form?
Why not use a timing chain instead of a belt? Simple gears would be more reliable, though I do like the engine. But it would be good to fix the issue with the screws breaking on the connecting rods. Aside from that, I’d like it to have more power.
It looks very promising, i would very much recommend upgrading the timing pulleys to have a larger tooth profile because all of the L200 and nr200 series run strong until the belt begins to slip during running , it would also be a good idea to use a larger screw on the connecting rod and to make from stronger material this was a weakness for nr200 as well , to reach such a high rpm with strong valve springs the timing pulleys need to be stronger and use a reinforced belt , keep going it’s very close .