CISON L4-26CC CDI Wiring Guide: Connections & Troubleshooting
Not sure how to connect the CDI ignition module on your CISON L4-26CC engine? This quick guide helps you identify the main wiring connections using a real engine setup photo .

Important Checks Before Starting
- Confirm that the battery voltage matches the CDI manufacturer's specifications.
- Make sure all four spark plug leads are correctly connected.
- Check that the Hall sensor connector is securely installed.
- Keep unidentified or exposed wires individually insulated.
- Disconnect the battery before making any wiring changes.
Important Safety Note: Never connect unidentified CDI wires directly to the battery, ground or generator output. Incorrect wiring may damage the ignition module. If you are unsure, contact Stirlingkit support before powering on the engine.
Need Help With Your CISON Engine?
If you have questions about the CDI connections, please contact service@stirlingkit.com . Include a clear photo of your CDI module, connector wiring and engine model so our support team can help identify the correct setup.
0 comments