What's the difference from ENJOMOR GS-L4 and D6? | Stirlingkit

What's the difference from ENJOMOR GS-L4 and D6? | Stirlingkit

What's the difference from ENJOMOR GS-L4 and D6? | Stirlingkit

Hello Enjomor supporters,

Enjomor is dedicated to designing and producing high-performance engine models. Before we made ENJOMOR V8-G52, Enjomor D6, Enjomor D7 engines, GS-V12, ENJOMOR GS-DK01. Frankly, I lost my way when we succeeded in making it from L4 to V12. In the beginning, I was just a car geek and was into model engines for years. I start to make model engines for years from L4 to v12. I find only a few of them receive positive feedback, which makes me depressed. In the beginning, I thought it would be cool if I could make v12 because v12 is a thing to me. and after a few years of trial, I made it.  And then I had no idea what to do next.  it has been a long time since I was stuck and frustrated. so my wife invited me to have a trip together with her. When I came back to work, I re-read all the reviews from the pros and customers of the engine we have made, so I suddenly realized what I cannot ignore is the feedback and ideas from Enjomor supporters deep in my mind. It's they who give us the confidence to keep going.
I want to start to make a new engine as I know the previous inline-four engine models are not as perfect as I had expected. So I want to make another new L4 engine with high performance this time. That's it. ENJOMOR GS-L4. if you have any ideas or suggestions on our engines, please comment or send them to service@stirlingkit.com

Content

1. What's the difference from ENJOMOR GS-L4 and D6?

2. What's New About ENJOMOR GS-L4?

 

1. What's the difference from ENJOMOR GS-L4 and D6?

 
Model GS-L4 D6
Valve  System     DOHC DOHC
Cylinder       Count    4 2
Piston Three-ring (2 gas rings +1oil
ring)
Three-ring (2 gas rings +1 oil
ring)
Intake Pipe Integrated Separate
Lubrication System Independent Integrated
Engine Base Aviation Aluminum Alloy Cast Iron
Cooling Type Wet Water Cooling Wet Water Cooling
Radiator Yes Yes
Water Pump Aviation Aluminum Alloy Cast Iron
Water Pipe Connector High Flow Multi-connector Joint Gem Joint
Intake System Separate Intake System Separate Intake System
Spark Plug 15mm Aviation Spark Plug Joint 8mm Aviation Spark Plug Joint
Exhaust System Integrated Muffler Exhaust Integrated Exhaust
Flywheel Yes No
Positive Ignition Protection Yes No
Engine Base Mounting
Bracket
Yes No
Oil Filter Connection Bolt Yes No
Engine Mounting Bracket Aviation Bracket Standard Bracket
Governor Yes Half Ball Governor
Water Temperature
Controller
Same as Previous Motion O-ring Adjustment
Surface Treatment Aviation Grade Silver Aluminum
Ventilation Density 2 1
CDI High Frequency CDI Standard CDI
Packaging Aviation Grade Packaging Standard Packaging
Optional Parts:Propeller
Mount
Yes No
Optional Parts: Gearbox Yes No
Optional Parts:Engine Base Yes No
 Optional Parts:Starter Motor Yes No

 

2. What's New About ENJOMOR GS-L4?


D6S is an advanced four-valve DOHC (double overhead camshaft) engine model designed for car enthusiasts and mechanical dynamics learners who pursue high performance and high simulation. Compared with the traditional D6 model, GS-L4 has been optimized in many aspects, improving the intake and exhaust efficiency, power output and thermal efficiency, making it a more competitive product on the market.

 

2.1 Cylinder block and cylinder head design

Compared with the traditional two-valve engine, the four-valve design of GS-L4 is not only superior in simulation, but also performs well in multiple technical indicators. The four-valve structure can significantly improve intake and exhaust efficiency, optimize mixture formation, and thereby improve power output and thermal efficiency. The specific performance is:

1.Higher intake and exhaust efficiency: The four-valve design allows a larger intake and exhaust cross-sectional area. Compared with two-valve, the intake area can be increased by about 30%, and the exhaust area can be increased by about 50%.


2.Better power output: Improved charging efficiency and combustion speed increase engine power output by up to 45%.


3.Higher thermal efficiency: By increasing the intake passage and improving the engine compression ratio, the power performance of a four-valve engine is far better than that of a two-valve engine with the same displacement.

 

2.2. DOHC (Double Overhead Cam)

The design of the DOHC engine allows the intake and exhaust valves to be driven by two camshafts respectively, which has the following advantages:


1. Sportiness and smoothness: the operation process is smoother and the noise is lower.

2.Advantages of multi-valve design: improved intake and exhaust efficiency, ensuring full combustion and better emission efficiency.

3. Flexible intake and exhaust valve control: the opening and closing time of the valve can be easily changed to optimize power output at different speeds.

4. Low power loss: reduced power loss caused by valve tappets and rocker arms.

 

 

2.3. Cycloid oil pump

The cycloid oil pump equipped with the GS-L4 adopts a unique structure that can realize forward and reverse fluid transmission. Its compact and sturdy design is suitable for complex working conditions and easy to maintain, ensuring stable operation under high load conditions.

2.4 Piston design

 

If you have any ideas, please leave your comments

 

 

0 comments

Leave a comment

Meet the Author

Danna is the editor-in-chief of our website blog and has been worked with stirlingkit for over five years.

Stirlingkit

Toyan V8 Nitro Engine FS-V800 RC Engine Model Building Kits 28cc

Regular Price
from $999.99
Sale Price
from $999.99
Regular Price
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

stirlingkit

CISON FG-VT9 9cc V-twin V2 Engine Four-stroke Air-cooled Motorcycle RC Gasoline Engine

Regular Price
$599.99
Sale Price
$599.99
Regular Price
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

Subscribe

Explain the benefits of subscribing