Toyan DIY Four Stroke Methanol RC Engine For RC Car Boat Plane FS-S100AC
FS-S100AC is in production now. all the order will be sent out at the middle of January, 2022. thanks again for your understanding. if you have any problems, please let me know. my email is email@example.com
.Build Your Own RC Engine :DIY Version product need to be assembled by yourselvers,Comes with paper instructions. When assembling, you can not only learn a lot about the design and about the engine, but also can improve your hands-on ability
.Small And Powerful:It can work with strong power after assembly.It weights 380g. Small in size and high in horsepower.
.Working Principle: Using methanol as fuel. As the piston moves back and forth in the cylinder, the process of moving from one end of the cylinder to the other is called a stroke. Four-stroke engines are divided into suction stroke, compression stroke, power stroke and exhaust stroke
.Methanol fuel is used: The formula of this fuel is generally: 20% castor oil, 5-30% nitromethane, and the rest is methanol. This product does not have high requirements on methanol fuel, and concentration of 20-25% is acceptable
.Operation: The ignition part is connected to the corresponding spark plug cap and then connected to the voltage regulator module, and finally connected to the 7.4v T-plug battery. The fuel part is the fuel tank connected to the oil pipe and connected to the engine. The starting part: after 11v T-plug battery connects to the ESC and simulator, and start the motor. The starting motor is attached
These accessories are not included, and all can be bought in our shop. These products are not special products, are general products. Other model engine accessories can also be used for this product. Buy according to the actual situation
.Multiple applications:Suitable to be mounted on 1:10, 1:12, 1:14 scale model car or model ship, model aircraft and other equipment. Can also be used for classroom demonstration, teaching AIDS，
.Note: Please use it carefully during operation. Do not touch the motor fan with your hands to avoid scratch, and do not touch the cylinder with your hands to avoid burns,Suitable for people over 14 years old.
After the assembly is complete, if it fails to start, check it first by the following methods:
1. Whether the battery voltage is normal, a 7.4v lithium battery is required, and the power must be full.
2. You have tested that the glow plug can light up, indicating that it can work normally. Troubleshoot this problem.
3. Can the fuel reach the carburetor smoothly? If the engine cannot suck oil, or you have mobilized the oil needle, you need to re-adjust the oil needle according to the instructions of the manual.
4. Is the synchronization timing belt adjusted to the correct position? If something is wrong, you need to re-adjust the timing
I expected this purchase to be fun.... big disappointment...
According to the web page description this item... has a luminous gyroscope?... has removable & interchangeable parts... has a bulb that lights up... and comes with an extra flywheel & allen key. That's all great and sounds like a fun item, but in reality: the "gyroscope" does not light up - I suspect a dead battery, no extra flywheel was included & no allen key was included, so there is nothing to remove & interchange, the engine can barely generate 2.5V - so the 5V bulb is never going to lite up. Oddly after a few minutes of running this engine now does not even work. It does need to heat up before running but now even after 5 minutes of direct flame this engine just won't run. I can only post 1 video so I cannot show the "dead" engine. Overall I can't give this more than 1 star for the overhyped description & missing parts
The engine received was not the one shown on the website
This engine runs very well, the problem is that the engine they sent does NOT match the item in the picture. I specifically wanted a thermo stirling engine with an "extended" hot tube. What they sent was the standard "short" hot tube variety. I already have 2 engines of this style, if I wanted another I could have purchased the one from this site for $23.99 or $19.99. Instead, I paid $29.99. If Stirlingkit no longer have this item in stock, they should UPDATE their website pictures and ADVISE the customer accordingly. This is very poor business practice on the part of Stirlingkit to make an unauthorized substitution. I have been very satisfied with my other purchases from Stirlingkit up until now
Well I have built this little engine was fun to build took me from 11pm to round 7 am the next morning as I was taking my time going to put it on a stand then start it up just waiting for the stand/base for it
A nicely packed kit love how the box is wood and everything is packed in black foam trays instructions are online but the contents are in plastic box’s. Like screw’s nuts and everything else needed to build it
I sent you an email describing my research and asking to speak with your engineers about reversing the rotation. I have had no response. I am a retired electrical engineer researching chirality and Tesla's concepts on Aether and gravity.