GT1500V3 1500mm Wingspan Composite Electric Aircraft RC Airplane Glider Model PNP /KIT Blue
.Thin-shell technology glass fiber reinforced plastic nose, carbon fiber hatch cover, carbon fiber tail tube, carbon fiber reinforced beam, carbon tube pin, three-stage paired wing, Z bend + ball joint rod, cable torsion spring tail group.
.Customers only need simple assembly.
.This model is all hand-made by experienced technicians. The outer surface of the wing is transparent skin, and the inside of the wing can be clearly seen.
.A one-stage flap design. A single servo realizes the overall flap function, which reduces the flight cost and avoids the influence of the inconsistent coordination of the two flaps on the aircraft motion characteristics. Flaps cooperate with ailerons to realize the butterfly brake function and improve the control performance of the aircraft
.All key parts are reinforced with carbon fiber materials, such as carbon fiber tailpipes and wing reinforcement beams. Better materials used for improving rigidity and torsion resistance of the aircraft, reducing the take-off weight of the aircraft and improving the control performance of the aircraft.
.Although all the wings are handmade, the wings are symmetrical.
.Note: 1. This model is a PNP version without remote control, receiver, battery, etc. However, the completion of this model is as high as 90 percent, and customers only need to buy relevant accessories to make it take off.
.Color: As Shown
.Fuselage Length: 1000mm
.Flying Weight: 500g
.Wing Area: 23.5dm2
.Flight Height: Over 100m
.Flight Time: According to the customer's Combination Power
.Center of Gravity Position: 55-65mm behind the leading edge of the wing
.Configuration Recommended: 6CH Remote Controller, 3S450-800mah Battery
.Product Weight: 1300g
.Package Dimensions: 110 x 31 x 11cm
.Package Weight: 2400g
.Packing: Graphic Carton
.1 x Fuselage
.1 x Motor
.1 x 30A ESC
.1 x Propeller
.3 x 5.5g Wing Servo
.2 x 9g Tail Fin Servo