Level 15 Methanol Engine DIY 4WD Electric Generator with Reverse Function 2.4G RC Off-road Climbing Car Model（Has been installed）
.High Configuration: equipped with Japan's 15-stage methanol water-cooled electric starter engine, the whole car is basically metal parts: aluminum alloy beam, all metal steel gear transmission
.With forward, neutral, back function
.8-link stable bridge structure with certain off-road performance, full metal tie rod, high simulation design
.Metal universal joint transmission, all inside the axle are metal gears, durable
.The tire is a 110mm super soft climbing tire with super grip
.And equipped with 2.4G three-channel proportional remote control and receiver, easy to operate
.Both the throttle and the steering are made of high-torque metal steering gear, equipped with oil pressure damping, and simulation is durable.
.Car Size: No car shell length 440mm, car shell 470mm wheelbase 313mm, can be equipped with third-party Wrangler car shell; total width 230mm without car shell height 200mm car shell height 220mm body beam height 110m
.Function: The engine position can be front or back, and the front and rear axles can be changed position.
.Proportional speed throttle size, steering angle can be controlled by size
.The car can be front/rear/reverse or brake/left/right/steer.
.Start Mode: one button electric start
.Fuel: 0 to 30% methanol fuel (can also be modified)
.Remote control distance is about 200 meters, fuel tank capacity: 75 ml (can play about 20 minutes, continue to play in the middle)
.Suitable for all terrains, beaches, flats, gravel, grass, etc.
.You can play it by hand, you don't need to assemble it yourself, you can also disassemble it and restore it, but you need to take the removal step in advance to restore it.
.Suitable for people over 12 years old
.Color: As Shown
.Material: Metal + Plastic + Electronic Components
.Product Dimensions: 44 x 23 x 20cm
.Product Weight: 2000g
.Package Dimensions: 55 x 30 x 30cm
.Package Weight: 2600g
.Packing: Carton Box
.1 x Methanol Engine