Upgrade of Enjomor 36cc I4 DOHC Engine | Stirlingkit

Upgrade of Enjomor 36cc I4 DOHC Engine | Stirlingkit

Upgrade of Enjomor 36cc I4 DOHC Engine | Stirlingkit
.

Dear Stirlingkit customers.

Glad to tell you that the new D6 engines have been upgraded.

1. Some customers reported that the cable was too short. So we specially lengthened the ignition wire. And it's very easy to link. The distributor connector uses a compression method to make the connector stronger, and the line distribution has been neater. And this design makes the thread end not easy to break. (our team is planning to produce a new distributor)

2. In order to prevent or reduce oil leakage, the latest gasket is used at each joint part between the oil sump and the shell. Oil seals are added to the oil pump and water pump cover plates too. Before shipping, we have done performance tests, so when you open the lid, it's normal for you to see some oil there. pls check photos below.

3. The crankshaft support is replaced with a crankshaft bearing to make the crankshaft more lubricated when it rotates. Under normal circumstances, the color of the camshaft is brown. Please note that this is caused by welding, not rust. The valve nail is made of stainless steel to prevent rust. The rocker arm is galvanized to prevent rust.

4.The exhaust pipe is galvanized to reduce the welding marks and look cleaner and tidy.

4.The steel gear was replaced and quenched, which solved the problem of gear wear. A second gear was added in the middle to make the start smoother when the flywheel rotates at high speed. The diameter of the idle wheel has been increased to 5mm to make the operation smoother and more stable

 



5.The entire electric start kit has also been improved.The oil sight hole has been changed to the bottom of the exhaust pipe.(check the photo in the 4.) The air intake pipe is made of a boss, so that the screw will not pass through the air intake cover, and the sealing is better.

6.You will find that the oil pipe is not visible from the outside of the engine. We now install it directly inside the engine,making the oil pipeline more concise and better sealed, so that it is safer when starting, and the belt will not reach the oil pipe. What's more,we have increased the diameter of the pulley to make the contact surface larger, increase the friction, and better drive the operation of the water pump and the oil pump.

7.Several holes are made in the shell to make the bracket easier to install. the bottom is well sealed.The base brackets are all installed before shipment.

8. please note that we still use the three-ring Design.

9. Evey engine is well packed so that it can arrive to your home safely.

Later I will update more running videos. if you want to send it back to me to replace it, pls contact me. if you have any other problems, pls feel free to contact me. my email is service@stirlingkit.com.

Normally, the factory itself will diagnose the engine model depending on the professional experience and see if the engine needs to be dismantled for further check or not. They will directly upgrade the returned D6 engine if there are no big issues on the engine. The factory & Stirlingkit together will cover the cost of the upgraded parts, like the cable, gasket, crankshaft bearing, exhaust pipe, steel gear, electric start kit, and air intake pipe. If there are broken parts that are not included in the free upgradation after the technicain assessed the engine status, I am sorry that ENJOMOR needs to charge the fee for repair at cost price since  charged parts and the upgraded parts are not the same. Any repair costs caused by personal improper operation need to be borne by the individual.  Thank you so much for understanding. 

We will ask ENJOMOR to take a video after the upgradation is completed and make sure it runs well. We will send you the test video for you to check before we send engine model back to you. 

REMINDER: Please do not disassemble the engine model before returning the engine parcel.

 

Custom Black color (2021.10.5)

 

 

11 comments

  • Phil DiMario: September 16, 2021

    will the upgrades be available for sale ?

Leave a comment

Meet the Author

Danna is the editor-in-chief of our website blog and has been worked with stirlingkit for over five years.

Stirlingkit

Toyan V8 Nitro Engine FS-V800 RC Engine Model Building Kits 28cc

Regular Price
from $1,699.99
Sale Price
from $1,699.99
Regular Price
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

stirlingkit

CISON FG-VT9 9cc V-twin V2 Engine Four-stroke Air-cooled Motorcycle RC Gasoline Engine

Regular Price
$599.99
Sale Price
$599.99
Regular Price
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

Subscribe

Explain the benefits of subscribing