Summer Flash SALE, 10% Site-Wide Coupon Code: D10
★ Free shipping worldwide/Return guarantee /Payment secure
Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection
Description:
Item Name: Full Metal Hit & Miss Gas Engine
Color: Sliver
Material: Aluminium Alloy
Weight: About 2.2kg(Engine+Wooden Base)
Size Of Engine: 180*125*75mm(L*W*H)
Size Of Wooden Base: 180*66*50mm(L*W*H)
Cylinder Diameter: 22mm
Ltinerary: 20mm
Voltage: 3.5V
Fuel: Kerosene or Gasoline
The best tappet clearance: 0.5mm
Weight: 1610g
Revolutions Per minute:1200rmp
Engine Startup Steps:
1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries.
2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there's no air in the oil pipe.
3.On the right side of the engine(installation of the flying hammer position), slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder.
4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position)
Precautions:
1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it's very likely that the carburetor needle should be adjusted.
2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio.
Note:
More engine review, please click here.
Package Included:
1 X Upgrade Hit & Miss Gas Engine (With Base)
Well constructed and precision engineering. My expectations have been rewarded. Well packaged with sturdy carton and foam moulded to suit the engine. Runs well. Supplied with starter cord, but starts easy by spinning the flywheel with an open palm hand.
Beautiful made engine; runs well and is very nice to look at. Got it running out of the packaging very easily. Started work on a custom base & exhaust immediately :-) Very happy with my purchase!
This engine was well-packed and had no damage to the product whatsoever. The milled parts of the machine are smooth and appear to have no imperfections. With a little fuel and the provided pull-string, it started up right away on the first try. Played with this micro engine several times and it performed perfectly each time. Very Satisfied.
Beautiful made engine; runs well and is very nice to look at. Got it running out of the packaging very easily. Started work on a custom base & exhaust immediately :-) Very happy with my purchase!
Beautiful engine that is very well designed and constructed. It would be right at home in a showcase. Runs great!
This engine is well built and has a lovely finish. I expected it to be fun to change the flywheel to see what effect it has on the engine speed and also fun
to see the small "generator" light up the bulb. Unfortunately the engine did not arrive with the extra flywheel nor was an allen key included, so the flywheel could not be changed. Also the bulb did not light up. When running this engine can only produce about 2.5V, so the 5V bulb is never going to work. A nice example of an alpha type sterling engine, but I cannot rate it more than 3 stars because of the missing items
This engine runs fantastic, the problem is that the engine they sent does NOT match the item in the picture. I specifically wanted a thermoacoustic stirling engine with an "extended" hot tube. What they sent was the standard "short" hot tube variety. I already have 3 engines of this style, if I wanted another I could have purchased the one from this site for $23.99 or $19.99. Instead, I paid $29.99. This engine comes with bearings in the flywheel mount so it runs exceptionally fast. It is a great engine overall, but unfortunately not the engine in the sales pictures. Based of performance this engine is "5 star", however Sterlingkit should never substitute engines without customer authorization first
Well I have built this little engine was fun to build took me from 11pm to round 7 am the next morning as I was taking my time going to put it on a stand then start it up just waiting for the stand/base for it
A nicely packed kit love how the box is wood and everything is packed in black foam trays instructions are online but the contents are in plastic box’s. Like screw’s nuts and everything else needed to build it
I sent you an email describing my research and asking to speak with your engineers about reversing the rotation. I have had no response. I am a retired electrical engineer researching chirality and Tesla's concepts on Aether and gravity.
