DIY Metal Single Cylinder Stirling Engine Model Power Generator Micro External Combustion Engine Stem Model
.Exquisite Appearence: The cool shape is like a fine fort. The hot cylinder liner is made of brass with good heat dissipation performance. The body, base and alcohol lamp are also made of aluminum alloy.
.Sealed Well: The whole machine uses a sealing ring, which is airtight and does not leak.
Screw-on metal alcohol lamp for safer use. Bringing a different visual and tactile experience like a piece of art
.Parameters: 180 x 75 x 90mm. The diameter of piston is 17mm, the diameter of the flywheel is 50mm. The pulley diameter is 25mm (there is a screw on the pulley to remove the small wheel)
.Fuel: 95% alcohol should be used in the operation (not included), not water, kerosene, gasoline, lighter oil, liquor.
.How to Start: Put the engine model on the horizontal position, then light the alcohol lamp on the front of the tube. After about 30 seconds to stir the flywheel, the engine can run, thus the small lamp is lit
.Meaning and Value: By operating the engine, you would observe and know the operational process and more intuitive understanding of the operating principle of stirling engine, deepening your interest in physics; Its superior quality and exquisite appearance also make it of high collection value, which can be used as high-end decorations or gifts.
.Suitable for people over 14 years old
.Warm Tips: Be careful not to get hot during operation. When the machine is running at high speed, vibration shift may occur. Please prevent the machine from falling off the table.
.Color: As Shown
.Material: Aluminum Alloy + Brass
.Product Size: 18 x 7.5 x 9cm
.Product Weight: 630g
.Package Dimensions: 23 x 13 x 16cm
.Package Weight: 830g
.1 x Stirling Engine Model